A little background, I have a 30hp American Rotary phase converter powering my MC-760V (MX-1 controller). I watched the machine run before I had the rigging company move it to my shop. I have it all wired, when I try to start it only the fans come on, the hydraulics do not come on.
The errors I am getting are, in order:
330: Emergency stop
310: Servo off
I know about hitting the green start button to turn on the servos. But nothing happens. Holding the reset and start button does nothing too. Both e-stops are released.
The machine has air, all fluids are full. I have researched and found a few threads about the error but no one updates the threads to say what their errors were caused by.
Any help would be appreciated, thanks.
The errors I am getting are, in order:
330: Emergency stop
310: Servo off
I know about hitting the green start button to turn on the servos. But nothing happens. Holding the reset and start button does nothing too. Both e-stops are released.
The machine has air, all fluids are full. I have researched and found a few threads about the error but no one updates the threads to say what their errors were caused by.
Any help would be appreciated, thanks.