macds
Hot Rolled
- Joined
- Jul 24, 2008
- Location
- Milverton, Ontario, Canada
I've tried emailing fadalcnc (havnt heard anything back, multiple times), kmac (referred me to fives, who appearantly now owns fadal name), and another more local company. Zero luck.
I have a 98 AC 4020, not prewired.
I have the DC rotary, an advanced motion controls 40acnh 20A DC (160Vmax) amp, and a 1010-5 control card with the v95.1k-5 ABnolim proms.
Im pretty sure I need the 4th prewire bundle, the inhibit circuit, and the brake solenoid + wiring.
I would assume the wiring bundle would be ordered for a DC machine (i need dc output for my rotary), as the power into the amp would be ac in either case.
Not sure if im missing anything, but im lacking on schematics (im lacking the schemas for this machine).
Would anyone be willing to hold my hand a bit through this?
What should I order from fadalcnc to make this happen, and can ya'll offer a wiring schematic for me?
Thanks guys!
I have a 98 AC 4020, not prewired.
I have the DC rotary, an advanced motion controls 40acnh 20A DC (160Vmax) amp, and a 1010-5 control card with the v95.1k-5 ABnolim proms.
Im pretty sure I need the 4th prewire bundle, the inhibit circuit, and the brake solenoid + wiring.
I would assume the wiring bundle would be ordered for a DC machine (i need dc output for my rotary), as the power into the amp would be ac in either case.
Not sure if im missing anything, but im lacking on schematics (im lacking the schemas for this machine).
Would anyone be willing to hold my hand a bit through this?
What should I order from fadalcnc to make this happen, and can ya'll offer a wiring schematic for me?
Thanks guys!