Newbie
Plastic
- Joined
- Feb 8, 2005
- Location
- Oxnard, CA
Hey does anyone know how to program a Delta 20 CNC. I am trying to get the one at my work to work right. I am using BobCAD to upload the file. Here is a test file that is supposed to start the machine, start the coolant, start the spindle, drill 3 holes with peck drill, stop the spindle, stop the coolant, and end the program. I keep getting a "format error" messege.
(test )
N001G90
N002G80
N003G40
N004G70
N005M08
N006M3S500
N007G04X8.0
N008G83 X3.0709 Y0.9843 Z.25K.125R.125Q.1F2
N009X7.0079
N0010G00 X10.5539 Y0.8996 Z0.
N0011G03 X10.9449 Y0.5842 I0.391 J0.0846F20
N0012Y0.9843 Z-0.025
N0013G80
N0014M05
N0015M09
N0016M02
I would really appreciate some help with this, the Dynapath manual is not very clear on this stuff. Thanks.
(test )
N001G90
N002G80
N003G40
N004G70
N005M08
N006M3S500
N007G04X8.0
N008G83 X3.0709 Y0.9843 Z.25K.125R.125Q.1F2
N009X7.0079
N0010G00 X10.5539 Y0.8996 Z0.
N0011G03 X10.9449 Y0.5842 I0.391 J0.0846F20
N0012Y0.9843 Z-0.025
N0013G80
N0014M05
N0015M09
N0016M02
I would really appreciate some help with this, the Dynapath manual is not very clear on this stuff. Thanks.