Hot Bob
Cast Iron
- Joined
- May 10, 2008
- Location
- Sanger, Texas / Westcliffe, Colorado
Being new to CNC, I've been working through lots of challenges with this machine. So here's the latest. I'm finished reading through the Yasnac manual, the RA1 manual, Peter Smid's "CNC Programming Handbook" and his "CNC Programming Techniques". I can read through a basic program and pretty much know what I'm looking at and what the machine is supposed to do. When I bought this machine, the previous owner said he would leave a few programs in the controller memory that I could use to get going. Study them and/or modify them and save as new programs. The problem is that the Yasnac manual is very, very difficult to make any sense out of. I cannot find the program list in the controller. Would one of you guys who is using a MX3 controller please give me a step-by-step on how to get to the program list and how to load the program? I really can't make any sense out of this part of the manual.
Thanks,
Bob
Thanks,
Bob