sagespecialized
Cast Iron
- Joined
- Jun 3, 2008
- Location
- Chatsworth, Ca.
I have a part to quote that is made from Nitronic 60.
I have never machined this material before so I am asking of those that have, how well does it cut and are there any pitfalls to watch out for?
It will be a milled part about .500 thick x 3.0 x 4.0. 1/8 rads in two corners, profile the outside, drill and tap in the end. Pretty straight forward looking part, I just am unsure about the material.
Thanks,
I have never machined this material before so I am asking of those that have, how well does it cut and are there any pitfalls to watch out for?
It will be a milled part about .500 thick x 3.0 x 4.0. 1/8 rads in two corners, profile the outside, drill and tap in the end. Pretty straight forward looking part, I just am unsure about the material.
Thanks,