Ukraine Train
Cast Iron
- Joined
- Feb 10, 2014
- Location
- Ohio
I'm getting ready to run a part with buttress threads but I'm not sure how to check what the infeed angle is set to on my lathe. I believe it's in a parameter? Machine is a Mori Seiki SL20 with Fanuc 0T. Can it be set in the canned cycle statement? Which threading cycle is appropriate? Thanks! Thread is 6.75"-4, by the way. It's pretty coarse; I'm wondering if I'll need to rough with another tool so I'm not blowing through threading inserts.
