does anybody know how to properly use a DECB function so that I can decode an M30 Function?
I have a programming book that explains the DECB function and I hooked it up loaded into the CNC but it still is not turning on the output I want.
this is what i have:
DECB: 0002
F0007
000030
R0027
MF
I I------------------DECB25---------------------------------
R0027 Y000.0
I I-----------------------------------------------O----------
Is this right? must not be cause when the M30 is commanded i see the rung 1 come on but rung 2 does not...
I have a programming book that explains the DECB function and I hooked it up loaded into the CNC but it still is not turning on the output I want.
this is what i have:
DECB: 0002
F0007
000030
R0027
MF
I I------------------DECB25---------------------------------
R0027 Y000.0
I I-----------------------------------------------O----------
Is this right? must not be cause when the M30 is commanded i see the rung 1 come on but rung 2 does not...
