markp
Hot Rolled
- Joined
- Oct 7, 2006
- Location
- Petaluma CA 94952
Romi M27 Bridgeport ezpath IIISL Linear slider bearings
Hi, I recently picked up a 2001 Bridgeport ezpath IIISL lathe. Iron is Romi M27. Everything works ok but the linear ball bearings that are on the control panel sliders and the lower linear bearings on the door are shot. They are INA KWE15H. INA doesnt make these anymore. I asked a local bearing house to look for a cross reference but they didnt have any luck. Wondering if anyone has had this problem and found a cross reference bearing by another manufacturer that will work on the same rail. As a last resort I was going to make some blocks out of brass with the same profile.
Hi, I recently picked up a 2001 Bridgeport ezpath IIISL lathe. Iron is Romi M27. Everything works ok but the linear ball bearings that are on the control panel sliders and the lower linear bearings on the door are shot. They are INA KWE15H. INA doesnt make these anymore. I asked a local bearing house to look for a cross reference but they didnt have any luck. Wondering if anyone has had this problem and found a cross reference bearing by another manufacturer that will work on the same rail. As a last resort I was going to make some blocks out of brass with the same profile.
Last edited: