SIM
Titanium
- Joined
- Feb 19, 2004
- Location
- Staten Island NewYork USA
I'm going back and forth on way to approach job....1/2-14 NPT Threadmill. For 303 SS I was just going to drill, chamfer, run the threadmill and be done....but the next part is 316 SS...has me on the fence...should I run a tapered mill around the hole first or will I be fine just running the threadmill in.
Larger diameters I use indexables, so if I'm wrong its a 50.00 mistake. A Solid carbide threadmill is a different story. I'd rather get some insight first.
Thanks
Larger diameters I use indexables, so if I'm wrong its a 50.00 mistake. A Solid carbide threadmill is a different story. I'd rather get some insight first.
Thanks