SeymourDumore
Diamond
- Joined
- Aug 2, 2005
- Location
- CT
Guys, like the title says, I am looking for a 3FL fine pitch Carbide roughers with a LOC of 1.5.
I have a bunch of 2" LOC cobalts, and they are doing the job, but damm they're also driving me ( and everyone else ) NUTS!!! with the noise.
Parts are 1.42" thick and I am slotting through them in a single pass ( extrusions with varying thickness, 1.42 is max )
I've had one oddball carbide with a 1.5" length and it was absolutely flawless until one miserable extrusion got loose in the fixture and put an end to it.
Unfortunately I cannot find a single indication as to who made it.
Alternately I'd be willing to get 2" LOC carbides and have the grinding house cut off the excess, unfortunately I cannot find those either.
Please note that I do NOT want the rougher/finisher type with the flat serrations!
I have a bunch of 2" LOC cobalts, and they are doing the job, but damm they're also driving me ( and everyone else ) NUTS!!! with the noise.
Parts are 1.42" thick and I am slotting through them in a single pass ( extrusions with varying thickness, 1.42 is max )
I've had one oddball carbide with a 1.5" length and it was absolutely flawless until one miserable extrusion got loose in the fixture and put an end to it.
Unfortunately I cannot find a single indication as to who made it.
Alternately I'd be willing to get 2" LOC carbides and have the grinding house cut off the excess, unfortunately I cannot find those either.
Please note that I do NOT want the rougher/finisher type with the flat serrations!