connermachinist
Plastic
- Joined
- Aug 2, 2017
I've been getting an alarm SV005 excess current discharge for every axis on my new to me Takisawa Mac-V2E. The previous owner has stated that he was not having that issue and that it could be related to the incoming voltage as he was running it at 208v and my line voltage is 220v. Before I put money into something like a transformer I'd like to get a second opinion on the issue and what it could be. The alarm happens intermittently and can sometimes be cleared by by toggling the main machine power but this does not always fix it. The alarm has only happened after the machine has been on for a few minutes but sometimes it doesnt happen at all. I'm definitely green when it comes to fanuc controls and any advice is apreciated.