miburk
Aluminum
- Joined
- Jan 15, 2011
- Location
- Germany,35764 Sinn
Hi, I have a little Problem with an FP4A ; Contour2
When i start the machine it gives an Error Message on the screen which shows Error 38.
This belongs to an Software Error on the NPP90.
44907-461-02-npp90-ic36-a
44907-461-02-npp90-ic37-b
-
-
44205-401-02-npp90-ic40-e
44205-401-02-npp90-ic41-f
I've read out the eprom content and it was the same as i have from another card.
So I am not sure if this EPROM Data i have is OK.
Does anybody have this version and can sent it to me please ?
Also the Machine shows the LED 3,6,7 on the NPP90 which stands for "Error in Communication between PC and CNC".
Thanks for ideas what also should be checked.
Regards
Michael
When i start the machine it gives an Error Message on the screen which shows Error 38.
This belongs to an Software Error on the NPP90.
44907-461-02-npp90-ic36-a
44907-461-02-npp90-ic37-b
-
-
44205-401-02-npp90-ic40-e
44205-401-02-npp90-ic41-f
I've read out the eprom content and it was the same as i have from another card.
So I am not sure if this EPROM Data i have is OK.
Does anybody have this version and can sent it to me please ?
Also the Machine shows the LED 3,6,7 on the NPP90 which stands for "Error in Communication between PC and CNC".
Thanks for ideas what also should be checked.
Regards
Michael