Luke Rickert
Hot Rolled
- Joined
- Oct 24, 2007
- Location
- OSLO
As far as I can tell the International Standards Organization does not have a standard nr 30. There is ISO 297:1988 (7/24 tapers for tool shanks for manual changing) which looks close from what I can see without buying it but the ISO website and the wikipedia list do not include anything called ISO 30. Is what Schaublin made the same as DIN 2080-1 without a grove or perhaps there is another standard in play such as NMTB. It seems like standards just make things more complicated as they give the false impression things are actually standardized.
I ask because I need a few tool holders for my 13 mill and am frustrated by not having an accurate search term. I was thinking I might get some Bison holders as they seem to be a good middle ground between the cheap chinese and super expensive Swiss parts. Has anyone tried Bison Type 7311 holders in a "ISO 30" Schaublin head? I can't find a dimension on the length of the end but they appear to be M12 threaded anyway.
This is from the Schaublin tool holding catalog:
Which would imply that "ISO 30" = DIN 2080 at the current time but what about 45 years ago when they made my milling machine.
Luke
I ask because I need a few tool holders for my 13 mill and am frustrated by not having an accurate search term. I was thinking I might get some Bison holders as they seem to be a good middle ground between the cheap chinese and super expensive Swiss parts. Has anyone tried Bison Type 7311 holders in a "ISO 30" Schaublin head? I can't find a dimension on the length of the end but they appear to be M12 threaded anyway.
This is from the Schaublin tool holding catalog:
Which would imply that "ISO 30" = DIN 2080 at the current time but what about 45 years ago when they made my milling machine.
Luke