What's new
What's new

Heidenhain T426-dmc103v-start-trouble

constantin

Plastic
Joined
May 7, 2013
Location
Romania
After 3-days pause, my dmc103V - tnc426 doesn't start. When I switch-on, the monitor appears like in
the picture attached, and doesn't go further (no references, and no specific error display). Would somebody have a suggestion?
 

Attachments

  • monitor-tnc426-dmc-103V.jpg
    monitor-tnc426-dmc-103V.jpg
    101.9 KB · Views: 371
Well, I should wait for Captain Obvious to answer, but I'll play him now and ask if your air pressure is to spec ;)
 
because I feel I wasn't very clear, I come back with more specifications:
After 3-days pause, my dmc103V - tnc426 doesn't start. When I switch-on, the monitor appears like in
the pictures attached, and doesn't go further (no references, and no unusual error display).
I mention that the error displayed up on the screen ("pneumatic switch signal 0") is normal at machine start (normally it will automatically cancel)
The problem is that the monitor does not display all. (in the first picture I marked the line where usually it should have been displayed the axis symbol x-y-z, and S - P.)
If I force to reference the axis, the alarm from second picture appears.
Thanks for suggestions
 

Attachments

  • tnc426-dmc103v-error1.jpg
    tnc426-dmc103v-error1.jpg
    14.4 KB · Views: 136
  • tnc426-dmc103v-error2.jpg
    tnc426-dmc103v-error2.jpg
    93.4 KB · Views: 417








 
Back
Top