Jerbob60
Plastic
- Joined
- Jan 31, 2012
- Location
- USA Illinois
I am having a problem with a large vertical machine center. The spindle coolant tube and the tool holding system have welded themselves together. I have a parts manual for this machine but it is the wrong one for the spindle. This machine is running now but I need to order parts before I take it apart. It is a VK-85 and the sereal # is VK-85038. If any one out there has one of these mills and has a drawing and parts list for the one that uses a spring loaded tube that fits inside the rod with the bellville springs I would be forever gratefull.
