What's new
What's new

Maho 700s error code I313

Danepa

Plastic
Joined
Jun 8, 2017
Hello,

Does anybody know what I313 - tool changer 90 degrees position 0-signal Error code mean and how to resolve this Error?

Machine is Maho 700S. Control unit is Philips 432.

We have just started to use this machine and we got a numerous error codes but this one we dont know how to resolve.

Thank you
 
if the tool changer is out you will have to manually put it back in by pressing the hydraulics distribuitors from the left side of the machine. check the documentation of witch distribuitors you will have to press.
 
Toolchanger rescuce function

There is a m mode M77 for toolchanger recovery if the control complains when you try to do it make sure the toolchanger is inside and the magazine flap is closed.

If it still will not run the command then disable/power cycle/enable the toolchanger constant and re-run M77.

Another way is to move it with the hydraulics very carefully with a spotter to make sure you don't run into something.

If it still will not run reload constants from a backup as that seems to clear the stored iplc data and call m77 and it should be back to normal.
 








 
Back
Top