Mori Seiki SL-250 (MSC-518) M11/M211 Issues
Close
Login to Your Account
Results 1 to 1 of 1
  1. #1
    Join Date
    Oct 2015
    Country
    UNITED STATES
    State/Province
    Texas
    Posts
    33
    Post Thanks / Like
    Likes (Given)
    3
    Likes (Received)
    0

    Default Mori Seiki SL-250 (MSC-518) M11/M211 Issues

    Hopefully y'all can help me here. I have a Mori Seiki SL-250, with the MSC-518 (Fanuc 18T) control. We recently got this machine in and got both the main and sub spindle lined up. We went to run a part transfer from the main to the sub, and when it ran across M211, the machine unclamped the second chuck, and then alarmed out. something about time up I think is what it was. We tried M11 for the main chuck and it did the same thing. the machine will clamp both chucks, and acknowledge the command. I've tried reversing chuck directions and we still run into the same issue. Could this be a problem with a timer or a counter? Thanks in advance for any help.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •