AC Classic V2: No technology for 0.1 graphite

mootrix · Apr 9, 2013

i hope someone can help me with trying to create a technology to cut graphite with 0.1 cobra cut since there is no technology on the system to allow me to do so. i know graphite cuts in 1 cut so i was wondering wether i could use steal technology 1 cut, would that be wise. The height of my graphite peice is 60 mm.

Cheers

Matt_W · Apr 10, 2013

mootrix said:
i hope someone can help me with trying to create a technology to cut graphite with 0.1 cobra cut since there is no technology on the system to allow me to do so. i know graphite cuts in 1 cut so i was wondering wether i could use steal technology 1 cut, would that be wise. The height of my graphite peice is 60 mm.

Cheers

I think it will struggle with 0.1mm through 60mm of graphite, I expect it will cut very slow. Rather than use the tech for steel, I would would see if there is tech for the same material and wire diameter but different wire material. Tech between cutting steel and graphite is completely different from my experience.

Search

Largest Manufacturing Technology Community on the Web

Search

AC Classic V2: No technology for 0.1 graphite

mootrix

Aluminum

Matt_W

Cast Iron

Similar threads