Hi everyone
I have several problem with CUT20. I hope that somebody have similar that he can help me.
First problem is that the upper contact is using to much after 10 hour i have to rotate .
I check and clean all critical parts.
The second problem is that dimensions off the part in not the same at the upper nozzle and lover nozzle.
At the lower nozzle is approx 0.02 mm lower.The machine made part like a carrot shape.
I already calibrate the wire.
Is it possible that is something wrong with wire tension.
regards T
I have several problem with CUT20. I hope that somebody have similar that he can help me.
First problem is that the upper contact is using to much after 10 hour i have to rotate .
I check and clean all critical parts.
The second problem is that dimensions off the part in not the same at the upper nozzle and lover nozzle.
At the lower nozzle is approx 0.02 mm lower.The machine made part like a carrot shape.
I already calibrate the wire.
Is it possible that is something wrong with wire tension.
regards T