Hi guys, i run several manual creator cr-5 machines, a charmilles roboform 35 and a 35p.
Our company has just taken ownership of a new Agie (GFMS) Form 200. Our machines are run very simply and one of the features on our old roboforms is they are programmed to choose the machining direction through a trig based line of code in the machine reading a variable.
I want to do the same on the Form machine but as these are g code i am unfamiliar with how to do so.
Any help appreciated.
Cheers.
Our company has just taken ownership of a new Agie (GFMS) Form 200. Our machines are run very simply and one of the features on our old roboforms is they are programmed to choose the machining direction through a trig based line of code in the machine reading a variable.
I want to do the same on the Form machine but as these are g code i am unfamiliar with how to do so.
Any help appreciated.
Cheers.
