Ed Rodrigues
Plastic
- Joined
- Mar 6, 2017
I've got a 1988 Robofil 200 wire edm.
It stopped right in the middle of a cut and I could not get it to move.
The screen went blank except for a message at the bottom. (PO5?)
I had to shut down machine and restart with initiation button pressed.
Nothing came up, no lights or screen.
It does beep two times, I usually hear three.
I'm pretty sure the screen works as it blinks when I shut it off again.
Tried to reinstall software but it won't read a disk.
Something won't let it do a complete restart.
Charmilles no longer supports this machine and having problems finding
anyone in California to take a look at it.
Any ideas?
It stopped right in the middle of a cut and I could not get it to move.
The screen went blank except for a message at the bottom. (PO5?)
I had to shut down machine and restart with initiation button pressed.
Nothing came up, no lights or screen.
It does beep two times, I usually hear three.
I'm pretty sure the screen works as it blinks when I shut it off again.
Tried to reinstall software but it won't read a disk.
Something won't let it do a complete restart.
Charmilles no longer supports this machine and having problems finding
anyone in California to take a look at it.
Any ideas?