zhoch
Plastic
- Joined
- Feb 13, 2014
- Location
- Goshen, IN
We have a Hostek SH-310P we are having issues with. We bought the machine used about seven years ago and received very little information with it. If anyone has a wiring diagram for this machine, it would be greatly appreciated.
The issue we are having involves the plunge feed of the head. I can manually move the head up and down with the controls. However, when the cycle starts it will rapid down to .050 above the part but will not feed down from there. This is also true for picking up the top of the part. It will not feed down.
The issue we are having involves the plunge feed of the head. I can manually move the head up and down with the controls. However, when the cycle starts it will rapid down to .050 above the part but will not feed down from there. This is also true for picking up the top of the part. It will not feed down.