tnmgcarbide
Diamond
- Joined
- Jul 6, 2004
- Location
- N. GA- 33.992N , -83.72W usa
the thing won't make a peep. i un-re-plugged all the molex connectors inside , cleaned the plug on the cable and i
sprayed out the jack on the machine . when i replace it with my MK cobra feeder into the power supply, its pilot lamp comes on,
but the motor won't feed and the gas solenoid doesn't fire. so, i'm assuming the issue lies in the CP-252 POWER supply.
but i'm not sure where to start. neither feeder will work.
sprayed out the jack on the machine . when i replace it with my MK cobra feeder into the power supply, its pilot lamp comes on,
but the motor won't feed and the gas solenoid doesn't fire. so, i'm assuming the issue lies in the CP-252 POWER supply.
but i'm not sure where to start. neither feeder will work.