I just picked up a MILLER XMT 300, the issue with the machine is there is no voltage readout, The readout lights up and reports .1 volt, rotating the dial makes no difference. What should I do to diagnose the fault?
Below is what I have done:
I checked all the fuses and they have continuity
I re-set CB1 and CB2
The one 'funny' thing is CB2 doesn't feel the same or have the same travel as CB1 on the re-set button, from reading the manual it didn't appear that CB2 should affect the readout screen
Any suggestion are appreciated.
David
Any suggestions on how to troubleshoot the problem?
Below is what I have done:
I checked all the fuses and they have continuity
I re-set CB1 and CB2
The one 'funny' thing is CB2 doesn't feel the same or have the same travel as CB1 on the re-set button, from reading the manual it didn't appear that CB2 should affect the readout screen
Any suggestion are appreciated.
David
Any suggestions on how to troubleshoot the problem?
