My aerowave has been idle for awhile and now the high frequency isn't working. Are there still breaker points in this machine? If so where are they located and also, where is the high freq located so I can check it for voltage before I put myself at the mercy of sending it back. I have heard repairs on this one are difficult.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
Miller aerowave--no high frequency
- Thread starter Bluechipx
- Start date
- Replies 4
- Views 2,335
Kiwi2wheels
Aluminum
- Joined
- Jan 12, 2008
- Location
- Orlando,FL, USA
Have a look through these, there is at least a link to a manual.
Miller aerowave repair, you tube - Google Search
Miller aerowave repair - Google Search
Miller aerowave repair, you tube - Google Search
Miller aerowave repair - Google Search
Fabworks
Hot Rolled
- Joined
- Jul 25, 2013
- Location
- California, USA
Here is a link to Miller for manuals.... Just type in the serial number of your machine.
Manuals & Parts - MillerWelds
Manuals & Parts - MillerWelds
Fixed!! Thanks for helping me find the info to locate the high freq points. They are set at .008" and I tried to push a .006" feeler gage through with no luck and after sawing it around a bit it went through and cleaned whatever was bridging the gap (conductive?) and now it works perfectly!
Thanks for the tips!
Thanks for the tips!
Next time try this -
http://www.millerwelds.com/resources/communities/mboard/forum/welding-discussions
http://www.millerwelds.com/resources/communities/mboard/forum/welding-discussions
