Results 1 to 4 of 4
Like Tree2Likes
  • 2 Post By PracticalMan

Thread: High Speed Roughing AL

  1. #1
    PracticalMan is offline Super Moderator
    Join Date
    May 2009
    Posts
    466

    Default High Speed Roughing AL



    High Speed Roughing Aluminum 6061 T6

    This is a video of a roughing application that is running at above 500 ipm. There is an interesting side bar - It was posted on You Tube and for some reason the sound did not work. Maybe this is why several comments came in from people who believed it was a fake – they suggested that the footage was sped up and that this is not possible.

    This skepticism reflects a problem that exists when people don’t continue their education or get outside their shop. The technology today enables so much more speed if you know how to leverage it. But it is difficult because without the ability to conduct some R&D on your part and really identify the right set-up you could miss an opportunity to run at much higher speeds.

    It is possible to hold extreme accuracy at this speed with the right set-up. High speed machining is a complex science, but with the right programming, tooling, holders and machine, you can cut an incredible amount of cost out of every piece. Many manufacturers have not kept current with the advances in programming techniques and hardware and are unaware of the speed and efficiency that can be accomplished with today’s technology. Here are the specs from this job.

    Set-up:
    • Material: 6061 T6 Aluminum
    • Cutter: Rocky Mountain single flute cutter
    • Holder: BIG Kaiser ¾ milling chuck
    • RPM: 15,000 on a rigid machine
    • Step over: .200
    • Depth of cut: .200
    • Speed of material removal: 500 inches per minute

    This video is presented courtesy of Hardmilling.com
    lostclockmaker and rlewis1945 like this.

  2. #2
    Hdpg is online now Stainless
    Join Date
    Feb 2009
    Location
    Vancouver, B.C. Canada
    Posts
    1,801

    Default

    What is the cutter diameter, 3/4", and how many flutes?

    I don't blame people for not believing, I have run similar speeds and even though I am the guy who wrote the program and pushed the green button all my 50 or so years of experience will not let me believe it.

  3. #3
    mm58's Avatar
    mm58 is offline Hot Rolled
    Join Date
    Feb 2009
    Location
    Tucson, AZ
    Posts
    630

    Default

    To me it looks like a legit video and not sped up. I say that
    because the spray and drippage of the coolant looks normal.

  4. #4
    Aaron Setunsky is offline Aluminum
    Join Date
    Mar 2007
    Location
    Tacoma, Washington USA
    Posts
    59

    Default

    Follow the link in the video.

    www.hardmachining.com and you can find more specs. It is a single flute small radius cutter, 10mm dia. It doesn't mention spindle speeds. Still seems hard to believe. They appear to be selling books on feed/speed data.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •