I
INTERPOLATE
Guest
I have to do a lot of dregreasing of parts before I work on them. Alot of brush work hanging over the solvent tank. I know there are automachines out there, but they are large and expensive.
I'd like to make my own. I picture something like a sand blast cabinet with a high pressure delivery of my solvent to the part. Which is SOLSAFE 245, 145F flashpoint, 149000v/cm.
http://www.biochemsys.com/msdssolsafe.html
Question is are there pumps out there that are safe to pump sovlents at high pressure with out explosion hazards?
Does anyone have any experience or words of caution on this?
Design suggestions?
Thank you.
DB
I'd like to make my own. I picture something like a sand blast cabinet with a high pressure delivery of my solvent to the part. Which is SOLSAFE 245, 145F flashpoint, 149000v/cm.
http://www.biochemsys.com/msdssolsafe.html
Question is are there pumps out there that are safe to pump sovlents at high pressure with out explosion hazards?
Does anyone have any experience or words of caution on this?
Design suggestions?
Thank you.
DB