SeymourDumore
Diamond
- Joined
- Aug 2, 2005
- Location
- CT
Can one of you gentlemen suggest some kind of cleaning solution to wash/clean 360 brass parts?
I have tried Simple green, PC10, dishwashing liquid and various other stuff, and the problem is that during drying, the parts get dark spots and the surface gets somewhat gritty.
I've also made the stupid mistake of putting them into the dishwasher < it'll be sometime before the wife forgives me for that one > with the hope that the extra heat will dry them faster, but the whole thing turned dull, gritty and just plain ugly.
Unfortunately tumbling is not an option as the surface req. is 16 or better, and there are some small holes that get completely caked if I use corncob or walnut shells.
I have tried Simple green, PC10, dishwashing liquid and various other stuff, and the problem is that during drying, the parts get dark spots and the surface gets somewhat gritty.
I've also made the stupid mistake of putting them into the dishwasher < it'll be sometime before the wife forgives me for that one > with the hope that the extra heat will dry them faster, but the whole thing turned dull, gritty and just plain ugly.
Unfortunately tumbling is not an option as the surface req. is 16 or better, and there are some small holes that get completely caked if I use corncob or walnut shells.