Jason H
Stainless
- Joined
- Mar 29, 2006
- Location
- Los Angeles, CA.
I did not want to hijack the other thread, I need help and suggestions on an LED project for lights for use on industrial sewing machines. I have around 50 machines in operation and the vibration seems to shorten the life span on the incandescent bulb. I am open to taking something off the shelf and butchering it, or starting from scratch.
All of the sewing machines have either high or low voltage outlets, so I would need a source for different types of transformers.
Some attributes that would be great:
Magnetic attachments or a base that could bee screwed down to the wood table
Goose neck like here:
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=96766
Industrial quality, some of my guys are tough on machines
Can be made on manual machines without too much stress. I can tool up for this if needed
The tables are two feet by four feet and all of the machines are made from cast iron. I can drill and tap to mount if needed.
Thank you in advance for any help or direction to other sites with ideas or supplies.
jason
All of the sewing machines have either high or low voltage outlets, so I would need a source for different types of transformers.
Some attributes that would be great:
Magnetic attachments or a base that could bee screwed down to the wood table
Goose neck like here:
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=96766
Industrial quality, some of my guys are tough on machines
Can be made on manual machines without too much stress. I can tool up for this if needed
The tables are two feet by four feet and all of the machines are made from cast iron. I can drill and tap to mount if needed.
Thank you in advance for any help or direction to other sites with ideas or supplies.
jason