Spud
Diamond
- Joined
- Jan 12, 2006
- Location
- Brookfield, Wisconsin
Hello
Unfortunately the seller doesn't state model number.
Only description is:
Gear head
220 3 phase
18" x 18" 2 way t-slotted table.
Here is a very similar drill head but mine has an extra shaft protrusion below the main lever.What looks like a collar is going from this shaft to the spindle.
Looking at Solberga senr7 from Machinery Values , the heads look very similar except for that above mentioned 2nd shaft protrusion below the main handle. I can see 2 nuts and bolts that must be how the head is clamped to the column along with a crank handle to raise and lower. So if I loosen the 2 bolts, I should be able to slide teh head off the column?
Need the following info:
Model number/name, year of mfg
*Weight*
*Can the head be seperated from the column by just loosing some bolts?*
Height of drill
Any info about the machine is welcomed.
The 2 asterixed info is what I am hoping to know asap.
Thanks
Unfortunately the seller doesn't state model number.
Only description is:
Gear head
220 3 phase
18" x 18" 2 way t-slotted table.
Here is a very similar drill head but mine has an extra shaft protrusion below the main lever.What looks like a collar is going from this shaft to the spindle.
Looking at Solberga senr7 from Machinery Values , the heads look very similar except for that above mentioned 2nd shaft protrusion below the main handle. I can see 2 nuts and bolts that must be how the head is clamped to the column along with a crank handle to raise and lower. So if I loosen the 2 bolts, I should be able to slide teh head off the column?
Need the following info:
Model number/name, year of mfg
*Weight*
*Can the head be seperated from the column by just loosing some bolts?*
Height of drill
Any info about the machine is welcomed.
The 2 asterixed info is what I am hoping to know asap.
Thanks