Tank
Cast Iron
- Joined
- Feb 8, 2009
- Location
- Wisconsin USA
I need help finding a supplier of metric ISO 3601 o-rings. All suppliers I have contacted only have AS568 o-rings given in metric sizes or a few common even MM sizes that won't work. Some do carry Japanese standard o-rings, but not these. Or they can make them for me with a $3200 tooling charge. I need real ISO metric sizes, nothing else will cross referance.
Once you dig into what the suppliers are advertising, you find their materials meet ISO 3601 but the don't carry the actual ISO metric sizes.
The ISO size I'm looking for are A0312, A0100, A0095, and A0056.
Material is Viton (fluoro-elastomer). I would want the material to be close to 75 durometer fluorocarbon per AMS 7276.
I was hoping maybe one of our European members might see this and know of a supplier, since the application is sealing to a French component and these must be available on that side of the pond.
Any help would be greatly apriciated. Tank.
Once you dig into what the suppliers are advertising, you find their materials meet ISO 3601 but the don't carry the actual ISO metric sizes.
The ISO size I'm looking for are A0312, A0100, A0095, and A0056.
Material is Viton (fluoro-elastomer). I would want the material to be close to 75 durometer fluorocarbon per AMS 7276.
I was hoping maybe one of our European members might see this and know of a supplier, since the application is sealing to a French component and these must be available on that side of the pond.
Any help would be greatly apriciated. Tank.