PJRitz
Aluminum
- Joined
- Nov 7, 2010
- Location
- Grove City, PA
Just got done making a new leadscrew for my 14x54 Hendey lathe, and having trouble figuring out a good way to debur it.
it has about 6 feet of 1 1/8-6 ACME thread with a 3/16 keyway milled down the entire length of it, I have everything pretty well deburred except for down in the roots of the threads where milling the keyway left a small burr, I deburred the rest of it with a deburring brush in the Bridgeport spindle but if I get too much more agressive with it, it will round over the crests of the threads too much.
Thanks
PJ Ritz
it has about 6 feet of 1 1/8-6 ACME thread with a 3/16 keyway milled down the entire length of it, I have everything pretty well deburred except for down in the roots of the threads where milling the keyway left a small burr, I deburred the rest of it with a deburring brush in the Bridgeport spindle but if I get too much more agressive with it, it will round over the crests of the threads too much.
Thanks
PJ Ritz