beaverracing
Cast Iron
- Joined
- Dec 8, 2007
- Location
- North East Pennsylvania
A customer has asked if I can build them a magnetized conveyor roller to remove small pieces of metal from their product. The diameter will be aprox 6" and about 48" long. Not sure how thick the belt will be, but I can find out.
Anyone done this, or have some ideas? Building the roller is no problem, I've done many before, but have no idea how to magnetize it. Should be a permanent magnet.
Thanks,
Jim
Anyone done this, or have some ideas? Building the roller is no problem, I've done many before, but have no idea how to magnetize it. Should be a permanent magnet.
Thanks,
Jim