American Standard Taper 200?

[sabre85rdj]

I just brought a Leblond 19 inch lathe home and I'm trying to get it set up so I can start using it. I sold a 16 inch SB lathe that was pretty well set up but this one was an upgrade even though it wasn't as well equipped. Anyway, I'm reading the manual I got off the net and it calls for an American Standard 200 taper. I can't find any dimensions for such a taper. I've found a few links that refer to an American Std taper but I can't find and specifications for a 200 so I can make one. I think all American Std tapers are 3/4 inch/ft taper but if someone has any information I'd greatly apprecaite it.

 

[johnoder]

Right in Machinery's Handbook - 3/4" taper per foot on dia. and 2.000" at gauge line (big end)


Its THE standard taper for the larger bore D1-6" and L1 spindle noses.


John Oder

 

[sabre85rdj]

I'll have to pick up one of those machinest handbooks. It sounds like they'd be real handy.

Thanks for the help