southbend1912
Plastic
- Joined
- Oct 8, 2010
- Location
- texas
If this is the wrong category for this, please let me know...
I need a rigging crew to move a 24"x 18' circa 1890 Wolcott and Sons lathe.
It is located in Flatonia Tx, in a ConEx box.
Weighs somewhere between 8-10,000 lbs.
I have exhausted every option I know of. The crews from Houston, Austin, San Antonio are busy, and don't want to go out there.
I need it moved about 40 miles to Giddings, Tx, and placed in my storage unit.
There's is plenty of room to load once it's out of the box.
Thanks In Advance. And again, if this needs to be moved to another category, let me know.
I need a rigging crew to move a 24"x 18' circa 1890 Wolcott and Sons lathe.
It is located in Flatonia Tx, in a ConEx box.
Weighs somewhere between 8-10,000 lbs.
I have exhausted every option I know of. The crews from Houston, Austin, San Antonio are busy, and don't want to go out there.
I need it moved about 40 miles to Giddings, Tx, and placed in my storage unit.
There's is plenty of room to load once it's out of the box.
Thanks In Advance. And again, if this needs to be moved to another category, let me know.
