nearbeer
Plastic
- Joined
- Jul 29, 2009
- Location
- Greenville, SC
Thanks for your time. I am looking to design a length of "C" channel that can be made in a press brake that has a portion of the web cut out (notched) prior to being bent into its final shape. I have guesstimated that the blank will be about 6-3/4" wide x 18" lg; the cut out (notch) would be 2-1/8" x 2-1/4".
Our plant doens't have an ironworker, just a press brake and a 60 ton press for punching holes & slots.
Any recommendation on die manufacturer's catalog(s) that may help me out in selecting a die that can make the notch in the blank prior to forming?
In search of my next cold one,
NearBeer
Our plant doens't have an ironworker, just a press brake and a 60 ton press for punching holes & slots.
Any recommendation on die manufacturer's catalog(s) that may help me out in selecting a die that can make the notch in the blank prior to forming?
In search of my next cold one,
NearBeer
Attachments
Last edited: