Ronald J Bennett
Plastic
- Joined
- Nov 29, 2010
- Location
- USA Tennessee North Central
Hi:
I need some assistance in trying to identify this Horizontal Mill, I believe that it is a TOS mill but beyond that I cannot find any additional nomenclature on it. I am also trying to locate a source for a manual, either a service or operating manual but hopefully, both.
The X,Y,Z, drives are operational, manually. The did operate with the auto drive until about 2 weeks ago. There was no indication that anything was wrong, I tyurned the machine on one morning and the automatic drive would not come on. I can hear the relays clicking but the drive motor does not want to kick in.
Any assistance would be greartly appreciated. I am a novice machinest but with about 12 years of experience and assistance from some friends who are the experts.
Thank You
Ron Bennett
I need some assistance in trying to identify this Horizontal Mill, I believe that it is a TOS mill but beyond that I cannot find any additional nomenclature on it. I am also trying to locate a source for a manual, either a service or operating manual but hopefully, both.
The X,Y,Z, drives are operational, manually. The did operate with the auto drive until about 2 weeks ago. There was no indication that anything was wrong, I tyurned the machine on one morning and the automatic drive would not come on. I can hear the relays clicking but the drive motor does not want to kick in.
Any assistance would be greartly appreciated. I am a novice machinest but with about 12 years of experience and assistance from some friends who are the experts.
Thank You
Ron Bennett