micrometer
Plastic
- Joined
- Jul 3, 2006
- Location
- Colorado Springs, CO
I have a 1/2 inch mic (Browne and Sharp #6) with a ratchet. The spindle is stuck on the anvil and the thimble turns freely in either direction. I've removed the ratchet screw and its pieces from the rear. I'm soaking the mic in breakfree. I've tried turning the spindle with a soft jaw pliers but it won't turn free.
Any suggestions of how to get this mic back to working order.
Thank You
Any suggestions of how to get this mic back to working order.
Thank You