I want to punch some 2" diameter holes in 1/2" thick rubber (neoprene) sheet with a durometer of 70A. I need about 20 discs. In other words, I need the drop out, not the hole.
Is a punch like this going to give me good results, i.e. a clean edge and easy cut?
McMaster-Carr
I'm thinking of not hitting it with a hammer but rather using my Dake arbor Press. Good idea?
Or am I better saving $77 and making my own punch on the lathe out of steel pipe?
Is a punch like this going to give me good results, i.e. a clean edge and easy cut?
McMaster-Carr
I'm thinking of not hitting it with a hammer but rather using my Dake arbor Press. Good idea?
Or am I better saving $77 and making my own punch on the lathe out of steel pipe?