Anyone have the Quincy QT-54 60 gallon upright compressor
might happen to know the elbow fitting size (thread) for the
copper tube going from the pump to the tank?
I found one place where I could get a high temp/pressure
SS braided hose made. That would go to a Hayden 1260
condenser.
Not looking to run a soft copper tube. Only if I really
really should. Ok, im open to suggestions.
Thanks all!
-Ugly
might happen to know the elbow fitting size (thread) for the
copper tube going from the pump to the tank?
I found one place where I could get a high temp/pressure
SS braided hose made. That would go to a Hayden 1260
condenser.
Not looking to run a soft copper tube. Only if I really
really should. Ok, im open to suggestions.
Thanks all!
-Ugly