olf20
Aluminum
- Joined
- Sep 30, 2008
- Location
- NW Illinois
Hi
My friend and I are trying to cut point on a live center for
my wood lathe.
The diameter of the material is 1.500 diameter and we want the taper to come
to a point at 1.625 inches.
Our lathe has a powered compound but we are not sure how to set up
the angle of the compound or the feed to get the above results.
Any help would be appreciated!
olf20 / Bob
My friend and I are trying to cut point on a live center for
my wood lathe.
The diameter of the material is 1.500 diameter and we want the taper to come
to a point at 1.625 inches.
Our lathe has a powered compound but we are not sure how to set up
the angle of the compound or the feed to get the above results.
Any help would be appreciated!
olf20 / Bob