Recently purchased a micro drill press, need some help with the wiring and the quill downfeed. The wiring was unhooked and the downfeed is missing. I can make the downfeed from pictures, but all the pictures are of the other side of the machine. Any information would be helpful. Thanks, Scot
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
Derbyshire Micro Drill Press Help
- Thread starter st44109
- Start date
- Replies 5
- Views 2,107
John Welden
Diamond
- Joined
- Mar 21, 2009
- Location
- Seattle
Haven't seen a derby micro drill press. Would like to see some pictures if you get a chance.
Thanks
Thanks
L Vanice
Diamond
- Joined
- Feb 8, 2006
- Location
- Fort Wayne, IN
That is a very rare machine. I have only seen the catalog picture. The Levin drill press is much more common, since I have seen two or three for sale in 50 years of looking, but was never able to buy one.
Derbyshire is still in business and may be able to help you.
email: [email protected]
Larry
Derbyshire is still in business and may be able to help you.
email: [email protected]
Larry
WizardOfBoz
Diamond
- Joined
- Sep 30, 2006
- Location
- SE PA, Philly
Jim Williams
Stainless
- Joined
- Oct 3, 2002
- Location
- Grant, Florida
I too would like to see pictures. I have a good bit of old Derby literature, and have not seen anything on a Derby drill press. Maybe Mark Fulmer will see this and have answers.
Jim Williams
Jim Williams
Will post pictures as soon as I get it back together. Just had to play with it when I brought it home, so I took it apart and started to clean it. Haven't decided if I sould strip the paint And repaint or make the missing pieces first. I might just put it together, shoot some pictures and then decide. Scot