Greatdaen
Plastic
- Joined
- Oct 5, 2013
- Location
- Phoenix, AZ
I bought an SPI electronic drop indicator off eBay. I had to do a little internal soldering but seems to be in good shape now.
It looks identical to the attached image except the "UNIT" button says "in/mm", the "RAN" button says "MIN", and the "TOL" button says "CAL". I can not seem to find my particular version in an internet search.
I am looking for a copy of the instruction manual. If someone has that in PDF it would be great. Or if someone was willing to explain the use of the "MIN", "CAL", and "ABS/SET" functions so that I can use this thing to its full potential.
Thanks.
It looks identical to the attached image except the "UNIT" button says "in/mm", the "RAN" button says "MIN", and the "TOL" button says "CAL". I can not seem to find my particular version in an internet search.
I am looking for a copy of the instruction manual. If someone has that in PDF it would be great. Or if someone was willing to explain the use of the "MIN", "CAL", and "ABS/SET" functions so that I can use this thing to its full potential.
Thanks.
