If you had a Buck adjust tru 5 inch chuck that worked fine but had alot of shallow dings on front and side, but you wanted it to look nice...maybe not quite brand new nice, but almost....would you remove the jaws and try and turn it on the lathe... or does it really need grinding on cylindrical grinder ? (which I don't have at the moment) In this case, Hardinge mount. The interupted cuts, esp on the front, might be hell on carbide....
I guess the open jaw slots should be stuffed with something to keep swarf out.
I guess the open jaw slots should be stuffed with something to keep swarf out.