rockfish
Titanium
- Joined
- Aug 27, 2006
- Location
- Munith, Michigan
We have a Warner & Swasey #5 (squarehead) that developed some feed issues. The crossfeed locked up on us. We took the cross slide off and while we did get some movement on the screw, we cannot get the screw out of it and we're only getting about 5 or 6" of travel. There is a bronze nut on the end of the screw for the taper attachment, which we can screw that off........but something is binding the screw from moving throughout it's entire travel and the only way I can see that it comes apart is........ it must unscrew from the lead nut, which we can't get it to do.
Any suggestions ??? Is this screw one piece.......or two ????
Frank
Any suggestions ??? Is this screw one piece.......or two ????
Frank