Metal Slave
Hot Rolled
- Joined
- Jun 24, 2005
- Location
- California
Spline data says:
External Spline to fit internal stub tooth spline
Flat root-Side fit
12 Teeth 32/64 Pitch
.375 Pitch Diameter-30' Pressure
angle per ANSI B92.2-1996
Guys over at the gear house are telling me to turn them to .405/.406
When I calculate per the handbook I am coming out with a number about .004 smaller.I'm sure these guys are right as they do this kind of stuff all day long but since I have never used this place before I want to be certain.
Anyone know what the major diameter should be?
External Spline to fit internal stub tooth spline
Flat root-Side fit
12 Teeth 32/64 Pitch
.375 Pitch Diameter-30' Pressure
angle per ANSI B92.2-1996
Guys over at the gear house are telling me to turn them to .405/.406
When I calculate per the handbook I am coming out with a number about .004 smaller.I'm sure these guys are right as they do this kind of stuff all day long but since I have never used this place before I want to be certain.
Anyone know what the major diameter should be?