sicero
Stainless
- Joined
- Feb 13, 2005
- Location
- Medway, Ohio
I just got a stock from Richards Microfit recently and for some reason they machined a flat area on the underside where the bottom metal fits about 5/16" deep and now lacks enough wood for the metal parts. The inletting is almost nonexistant. There are big gouges on the sides of the stock by the action area. I will be cutting it down in these areas, so it won't hurt me. It is left handed CZ but thats no excuse.
Fortunately the stock is for my son and he wants the trigger guard modified with the magazine removed with a single shot follower so I will be able to cut the top of the magazine box and use the stock. I really didn't consider sending the stock back since it took three months to get it and the wood is fantastic for what I paid. I can also duplicate it
leaving more wood. I actually bought it for the left hand pattern. I haven't talked to them about this but I think I should. Most people wouldn't be able to use a stock with these problems. In the past years I have bought several stocks from them and until now there was enough wood. I have always been more than satisfied with the wood and pricing and still am. I wonder what someone does that thinks a bit of sanding will be it. Kenny
Fortunately the stock is for my son and he wants the trigger guard modified with the magazine removed with a single shot follower so I will be able to cut the top of the magazine box and use the stock. I really didn't consider sending the stock back since it took three months to get it and the wood is fantastic for what I paid. I can also duplicate it
leaving more wood. I actually bought it for the left hand pattern. I haven't talked to them about this but I think I should. Most people wouldn't be able to use a stock with these problems. In the past years I have bought several stocks from them and until now there was enough wood. I have always been more than satisfied with the wood and pricing and still am. I wonder what someone does that thinks a bit of sanding will be it. Kenny