Engine Room Artificer
Hot Rolled
- Joined
- Feb 28, 2007
- Location
- Gosport Hampshire UK
Gents,
Another favour, I've been anked to produce 2 x .50 cal shells for a static display out of solid brass. I have a casing as a pattern but no bullet.
Could somebody please give me an idea of how the bullet should look, ie length protruding from casing, angle and radius of curve if any. Also is it sharp or slightly rounded.
I've guestimated the taper of the casing to be about 1 in 40 or 1 deg 25 mins, does that sound about right?
Thanks in advance
Al
Another favour, I've been anked to produce 2 x .50 cal shells for a static display out of solid brass. I have a casing as a pattern but no bullet.
Could somebody please give me an idea of how the bullet should look, ie length protruding from casing, angle and radius of curve if any. Also is it sharp or slightly rounded.
I've guestimated the taper of the casing to be about 1 in 40 or 1 deg 25 mins, does that sound about right?
Thanks in advance
Al