Texas Bear
Plastic
- Joined
- Feb 3, 2012
- Location
- Texas USA
I need some Winchester 1895 Russian Musket Cartridge Clip Guide Screws. They are a 3/16-36 thread. I knew that they are not standard in the US but thought I could find a shop to make some, 30 to 100, for a reasonable price.
It is very close to the Winchester 1873 Side Tang Screw. (The head is slightly different and the length is close.)
Thus far the places I have contacted are to busy, to high, or cutback on work. If anyone has a suggestion of a place to make these I would appreciate knowing.
I have one for a sample, and one Clip for testing it on. Also, depending on the price, I might get 20 or so Clips.
It is very close to the Winchester 1873 Side Tang Screw. (The head is slightly different and the length is close.)
Thus far the places I have contacted are to busy, to high, or cutback on work. If anyone has a suggestion of a place to make these I would appreciate knowing.
I have one for a sample, and one Clip for testing it on. Also, depending on the price, I might get 20 or so Clips.