Situation; I am sick of taking long tools out at the end of the day, so when we power up the TRM in the morning the tools in the carousel don't hit the fourth. How can I get around it? Can I make the X axis home to the left side of the table instead of the right side?
Second situation; Today we had a power surge that shut everything down the Haas 1600 Horizontal was balls deep in a cut. I was afraid if I hit powerup/restart that the A axis would start first (it didn't luckily). But now that I am writing I think I can specify each axis individually correct? But wait, let's say you are in the middle of undercutting something or you are thread milling or the like, and you shut down, is there a way to jog axes before powerup/restart? That's a better question.
Thanks fellas, Robert
Second situation; Today we had a power surge that shut everything down the Haas 1600 Horizontal was balls deep in a cut. I was afraid if I hit powerup/restart that the A axis would start first (it didn't luckily). But now that I am writing I think I can specify each axis individually correct? But wait, let's say you are in the middle of undercutting something or you are thread milling or the like, and you shut down, is there a way to jog axes before powerup/restart? That's a better question.
Thanks fellas, Robert